Countershaft, M/T

Countershaft	Diameter of needle bearing contact area (clutch housing side)	Standard or new	34.000 - 34.015 mm
		Service limit	33.95 mm
	Diameter of ball bearing contact area (transmission housing side)	Standard or new	24.980 - 24.993 mm
		Service limit	24.93 mm
	Diameter of 1st gear contact area	Standard or new	37.984 - 38.000 mm
		Service limit	37.934 mm
	Runout	Standard or new	0.02 mm
		Service limit	0.05 mm
Countershaft 1st gear	I.D.	Standard or new	43.009 - 43.025 mm
		Service limit	43.070 mm
	End play	Standard or new	0.03 - 0.10 mm
		Service limit	0.22 mm
	Thickness	Standard or new	26.89 - 26.94 mm
Countershaft 2nd gear	I.D.	Standard or new	45.009 - 45.025 mm
		Service limit	45.070 mm
	End play	Standard or new	0.04 - 0.12 mm
		Service limit	0.24 mm
	Thickness	Standard or new	27.41 - 27.46 mm
Countershaft 2nd gear spacer collar	I.D.	Standard or new	34.000 - 34.010 mm
		Service limit	34.040 mm
	O.D.	Standard or new	39.989 - 40.000 mm
		Service limit	39.930 mm
	Length	Standard or new	27.53 - 27.56 mm
		Service limit	27.51 mm