Shifter M/T
| Shift arm | I.D. | Standard or new | 13.973 - 14.000 mm |
| Shift fork diameter at contact area | Standard or new | 12.9 - 13.0 mm | |
| Shift arm-to-shaft lever clearance | Standard or new | 0.2 - 0.5 mm | |
| Service limit | 0.62 mm | ||
| Select lever | Finger width | Standard or new | 14.75 - 14.95 mm |
| Shift lever | Shaft-to-select lever clearance | Standard or new | 0.05 - 0.35 mm |
| Service limit | 0.6 mm | ||
| Groove (to select lever) | Standard or new | 13.00 - 13.15 mm | |
| Shaft-to-shift arm clearance | Standard or new | 0.013 - 0.07 mm | |
| Service limit | 0.1 mm |