Panel Side Trim Replacement
Panel Side Trim ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014
Without Console Armrest and With Console Beverage Holder Lid
NOTE:
- Take care not to scratch the center console.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Slide the front seat rearward fully.
2. Carefully insert a trim tool next to the clips, and detach the clips by prying on the panel side trim (A), then remove it from the center console (B).
3. Install the trim by pushing on the clip portions until the clips snap into place.