Front Seat Disassembly/Reassembly - Passenger's
Front Seat Disassembly/Reassembly - Passenger'sSpecial Tools Required
KTC trim tool set SOJATP2014
2-door
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.
- Make sure the rear seat access cable is connected properly on each side.
- Replace any damaged clips, and replace the wire ties with new ones.
4-door
For some models: SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- The driver's seat without manual height is symmetrical except it has no OPDS harness
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.