ATF Replacement
ATF ReplacementNOTE: Keep all foreign particles out of the transmission.
Change Intervals: Replace at 48,000 miles (80,000 km) or 48 months, then replace every 36,000 miles (60,000 km) or 36 months in normal conditions
Replace every 24,000 miles (40,000 km) or 24 months in severe conditions
1. Park the vehicle on level ground.
2. Remove the drain plug (A), and drain the automatic transmission fluid (ATF).
NOTE: If a cooler flusher is to be used, refer to ATF Cooler Flushing.
3. Reinstall the drain plug with a new sealing washer (B).
4. Refill the transmission with the recommended fluid into the dipstick hole (A). Always use Honda ATF-Z1 Automatic Transmission Fluid (ATF). Using non Honda ATF can affect shift quality.
Automatic Transmission Fluid Capacity:
3.1 L (3.3 US qt) at changing
5.6 L (5.9 US qt) at overhaul
5. Check that the fluid level is between the upper mark (E) and lower mark (F) on COLD gauge (D), if the dipstick has COLD gauge.
6. Insert the dipstick back into the transmission.
7. Warm up the engine to normal operating temperature (the radiator fan comes on).
8. Check that the fluid level is between the upper mark (A) and lower mark (B) on HOT gauge (C). Do not check the level with COLD gauge (D) when the ATF wormed up.