Door Lock Knob Switch Test
Door Lock Knob Switch Test4-door
1. Remove the driver's door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the No.1 and No.2 terminals.
- There should be continuity when the door lock knob switch is in the LOCKED position.
- There should be no continuity when the door lock knob switch is in the UNLOCKED position.
4. If the continuity is not as specified, replace the door lock actuator.
2-door
1. Remove the driver's door panel.
2. Disconnect the 3P connector from the actuator.
3. Check for continuity between the No.1 and No.2 terminals.
- There should be continuity when the door lock knob switch is in the LOCKED position.
- There should be no continuity when the door lock knob switch is in the UNLOCKED position.
4. Check for continuity between the No.1 and No.3 terminals.
- There should be continuity when the door lock knob switch is in the UNLOCKED position.
- There should be no continuity when the LOCKED position.
5. If the continuity is not as specified, replace the door lock actuator.