2 Door

Power Mirror/Manual Mirror Replacement

2-door

1. Lower the door glass fully.




2. Carefully pry out the mirror mount cover (A) by hand in the sequence shown.
3. Remove the door panel.




4. If equipped with a tweeter, pull the plastic cover (A) back as necessary, and disconnect the connector (B), then remove the mirror mount cover (C) with the tweeter.
5. On power mirror model: Disconnect the connector (D).
6. While holding the mirror, remove the nuts securing the mirror, and remove the mirror (manual mirror model)




7. On power mirror model: While holding the mirror, push in on the connector clips (A), then push out to remove the mirror (B). Take care not to scratch the door.

8. Install the mirror in the reverse order of removal, and make sure the connector is plugged in properly (power mirror model).