Dashboard Pocket Removal/Installation
Dashboard Pocket Removal/InstallationNOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
1. Remove the driver's pocket (A).
1. Remove the driver's dashboard under cover.
2. Open the pocket, and remove the screw (B).
3. From behind the dashboard, push the pocket back by hand to release the clips (C).
4. Release the hooks (D).
5. If equipped, disconnect the cruise control main switch connector (E), moonroof switch connector (F), and power mirror switch connector (G).
2. Install the pocket in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly (for some models).
- Push the clips into place securely.