P0145
DTC P0145: Slow Response in Third HO2S (Sensor 3) Circuit-'02-03 M/T models1. Reset the ECM.
2. Start the engine. Hold the engine at 3,000 rpm with no load (in neutral) until the radiator fan comes on.
3. Test/drive under following conditions.
- 55 - 65 mph (89 - 105 km/h) steady speed
- Transmission in 4th or 5th gear
- Until the readiness code or Temporary DTC P0145 and/or P0145 is set
4. Check for a Temporary DTC with the scan tool.
Is Temporary DTC P0145 and/or P0145 indicated
YES - Replace the Secondary HO2S (Sensor 2), and the Third HO2S (Sensor 3).
NO - Go to step 5.
5. Check the Third HO2S (Sensor 3) output voltage at 3,000 rpm with the scan tool.
Does the voltage stay within 0.3 - 0.6 V for two minutes?
YES - Replace the Secondary HO2S (Sensor 2), and the Third HO2S (Sensor 3).
NO - Intermittent failure, system is OK at this time. Check for poor connections or loose wires at the Third HO2S (Sensor 3) and at the ECM.