Removal and Replacement
Seat Removal/InstallationNOTE: Take care not to scratch the body or tear the seat covers.
1. Remove the seat as shown.
2. Install the seat in the reverse order of removal, and note these items:
- Make sure the seat belt switch connector on the driver's seat is plugged in properly.
- Apply liquid thread lock to the seat mounting bolts and the anchor bolt before reinstallation.
- Tighten the seat mounting bolts to the specified torque in the sequence shown. Slide the seat all the way back and tighten (1) and (2), then slide it forward and tighten (5) and (4).
- Before installing the seat belt lower anchor bolt, make sure there are no twists or kinks in the seat belt.