Crankshaft Pulley Removal and Installation

Removal and Installation

Special Tools Required
^ Holder handle 07JAB-001020A
^ Holder attachment, HEX 50 mm, offset 07MAB-PY30100
^ Socket, 17 mm 07JAA-001010A or a commercially available 17 mm socket

Removal





1. Hold the pulley with holder handle (A) and holder attachment (B).
2. Remove the bolt with a heavy-duty 17 mm socket (C) and breaker bar.

Installation





1. Clean the bolt (A), washer (B), pulley (C) and crankshaft (D).
2. Install the crankshaft pulley, and tighten the bolt to 20 Nm (2.0 kgf-cm, 141 ft. lbs.).





3. Tighten the pulley bolt an additional 90°.