Rocker Arm Assembly and Camshaft Installation
InstallationNOTE: To prevent the rocker arm assembly from coming apart, leave the rocker shaft mounting bolts in the holes.
1. Apply engine oil to the bolt threads of all camshaft holder bolts.
2. Put the camshaft and the camshaft holders on the cylinder head, then tighten the bolts, in sequence, to 12 Nm (1.2 kgf-cm, 8.7 ft. lbs.).
3. Install the rocker arm assembly on the camshaft holders, then tighten the rocker shaft mounting bolts, in sequence, to 22 Nm (2.2 kgf-cm, 16 ft. lbs.).