How to End A Troubleshooting Session

How to End a Troubleshooting Session
You can reset the Motor Control Module (MCM) using either this method or How to Reset the MCM.

1. Reset the MCM.
2. Turn the ignition switch OFF.
3. Remove the No.15 EPS (40 A) fuse from the under-hood fuse/relay box.
4. Start the engine, and hold it at 3,500 rpm with no load (in neutral) until the IMA battery level indicator(BAT) on the gauge becomes normal.
5. Reinstall the No.15 EPS (40 A) fuse.