Handling of Special Nuts and Bolts

Handling of Special Nuts and Bolts
Because many sections on this vehicle are constructed with aluminum alloys. Use only the special "Dacro" type nuts and bolts recommended by Honda.






NOTE:
* Dacro finish can be identified by gray plating.
* Some Dacro finish bolts have a green coating on the thread section of the bolt for easier application. This type of bolt is called a "Torquer" bolt.
* Use of other types of nuts and bolts may cause electrolysis and corrosion, which in turn could cause the bolt to loosen.
Gray plating: "Dacro" type
Gray plating + Green coating on the threads: "Torquer" type

1. When replacing nuts and bolts, use only the same type.
2. Tighten the nuts and bolts with a torque wrench to the specifications.
3. Clean all threads with a non-wire-type bristle brush. Foreign matter in the threads may cause the bolt to loosen.





4. Sections on this vehicle requiring the use of Dacro nuts and bolts will be indicated by a (*).