Rack Guide Removal & Installation
Removal/InstallationNOTE: During removal/installation, do not allow dust, dirt, or other foreign materials to enter the gearbox.
1. Loosen the locknut (A), then remove the rack guide screw (B), disc washer (C), spring (D), and rack guide (E).
2. Grease the sliding surface of the rack guide, and install it onto the gearbox housing.
3. Install the spring.
4. Install the disc washer with its convex side facing in.
5. Remove the old sealant from rack guide screw, and apply new sealant all around the threads. Loosely install the rack guide screw on the steering gearbox.
6. Loosely install the locknut.
7. Adjust the rack guide screw. After adjusting, check that the rack moves smoothly by sliding the rack right and left.