Shift Forks Clearance Inspection
Shift Forks Clearance InspectionNOTE: The synchro sleeve and synchro hub should be replaced as a set.
1. Measure the clearance between each shift fork (A) and its matching synchro sleeve (B). If the clearance exceeds the service limit, go to step 2.
2. Measure the thickness of the shift fork fingers.
^ If the thickness of the shift fork finger is less than the standard, replace the shift fork with a new one.
^ If the thickness of the shift fork finger is within the standard, replace the synchro sleeve with a new one.
3. Measure the clearance between the shift fork (A) and the shift arm (B). If the clearance exceeds the service limit, go to step 4.
4. Measure the width of the shift arm.
^ If the width of the shift arm is less than the standard, replace the shift arm with a new one.
^ If the width of the shift arm is within the standard, replace the shift fork or shift piece with a new one.