Upper Rear Window Replacement

Upper Rear Window Replacement

NOTE:
- Familiarize yourself with the glass replacement process .
- Remove the upper rear window and molding as an assembly. If the molding is damaged, replace it as described.

Parts Removal
Disconnect the upper rear window defogger connectors, and remove these items:
- Hatch spoiler trim
- Rear window trim
- Rear window wiper motor




Cutting Positions
Slip the piano wire through the adhesive at each position as shown, and pull it back as indicated by the arrows.




Rubber Dams, Fasteners, and Spacers Installation
- Attach the rubber dams, the fasteners, and the spacers with adhesive tape.
- Be sure the rubber dams, fasteners, and spacers line up with the alignment marks.




Fasteners (body side) Installation/Body Primer Application
Attach the fasteners with adhesive type.




Glass Primer And Adhesive Application