Fuel Filter: Service and Repair

FUEL PUMP

REMOVAL (INCLUDING FUEL FILTER AND FUEL PRESSURE REGULATOR)
1. Preparation
1. Remove the 2nd seat.




2. Open the carpet for fuel pump (A).




3. Remove the service cover for fuel pump (A).




4. Disconnect the fuel pump connector (A).
5. Start the engine and wait until fuel in fuel line is exhausted.
6. After engine stops, turn the ignition switch off.




2. Disconnect the fuel tank pressure sensor connector (A).
3. Disconnect the fuel feed quick-connector (B) and the vacuum tube quick-connector (C).
4. Unfasten the fuel pump plate cover (D) and disconnect the suction tube at the bottom of the fuel pump.




5. Remove the fuel pump from the fuel tank.

INSTALLATION
1. Install the fuel pump in according to the reverse order of "REMOVAL" procedure.