Rear Wiper Motor
REAR WIPER MOTORREPLACEMENT
1. Detach the wiper cap (A), then remove the rear wiper arm (C) after removing a nut (B).
Tightening torque Nut (B) : 10-14 N.m (1.0-1.4 kgf.m, 7-10 lbf.ft)
2. Remove the rear wiper cap & pad (B) after removing a nut (A)
Tightening torque Nut (A) : 10-14 N.m (1.0-1.4 kgf.m, 7-10 lbf.ft)
3. Open the tailgate glass then remove the tailgate trim.
4. Disconnect the rear wiper motor connector then remove the rear wiper motor (B) after removing 3 bolts.
Tightening torque Nut : 10-14 N.m (1.0-1.4 kgf.m, 7-10 lbf.ft)
5. Installation is the reverse of removal.