Campaign - Front Roof Rack Inspection/Replacement
Group: CAMPAIGNNumber: 07-01-008
Date: MAY, 2007
Model:
VERACRUZ (EN)
Subject:
FRONT ROOF RACK COVER INSPECTION AND REPLACEMENT (SERVICE CAMPAIGN T43)
IMPORTANT:
DEALERS MUST PERFORM THIS CAMPAIGN ON ALL AFFECTED VEHICLES PRIOR TO CUSTOMER RETAIL DELIVERY AND WHENEVER AN AFFECTED VEHICLE IS IN THE SHOP FOR ANY MAINTENANCE OR REPAIR.
IMPORTANT:
WHEN A VEHICLE ARRIVES AT THE SERVICE DEPARTMENT, ACCESS HYUNDAI MOTOR AMERICA'S "WARRANTY VEHICLE INFORMATION" SCREEN VIA DCS ON-LINE TO IDENTIFY OPEN CAMPAIGNS.
DESCRIPTION:
Some Veracruz vehicles produced during the range given below may exhibit loose front roof rack covers. This bulletin provides the procedure for front roof rack cover inspection and, if necessary, replacement.
APPLICABLE VEHICLES:
^ Model: VERACRUZ (EN) Vehicles
^ Applicable vehicle production date range:
^ Produced from December 06, 2006 to February 15, 2007
PARTS REQUIRED
SERVICE PROCEDURE:
1. Inspect both left and right sides to determine that the front roof rack covers (A) are installed securely.
2. If the front roof rack cover becomes loose or separates from the roof rack, reinstall it by pressing down with your hands.
3. After reinstalling the front roof rack cover, inspect to confirm it is secure.
4. If the front roof rack cover is not secure and remains loose or separates from the roof rack, replace it with a new part.
CAUTION:
When removing the front roof rack cover, use a flat blade screwdriver which is wound with protective tape to prevent damage to the front roof rack pad (B) and the roof panel.
CAMPAIGN CLAIM INFORMATION