Ignition System: Service and Repair

IGNITION SYSTEM

REMOVAL
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel.
3. Remove the steering column cover.




4. Remove the key warning switch and key illumination lamp (B) after disconnecting the 6P connector (A).




5. If it is necessary to remove the key lock cylinder (A), Remove the key lock cylinder (A) after pushing lock pin (B) with key ACC.

INSTALLATION
1. Reassemble the key lock cylinder.
2. Reassemble the key warning switch and key illumination lamp.
3. Reassemble the steering column cover.
4. Reassemble crash pad lower panel.