Crankshaft Main Bearing
CrankshaftMain journal outer diameter 68.942 - 68.960 mm (2.7142 - 2.7149 in.)
Pin journal outer diameter 54.954 - 54.972 mm (2.1635 - 2.1642 in.)
Main bearing oil clearance 0.022 - 0.040 mm (0.0008 - 0.0016 in.)
End play 0.10 - 0.28 mm (0.0039 - 0.0110 in.)
Main bearing cap bolt
1 - 8 49.00 Nm (5.0 kgf.m, 36.16 lb-ft) + 90 degrees
9 - 16 19.60 Nm (2.0 kgf.m, 14.46 lb-ft)+ 120 degrees
17 - 22 29.40 - 31.36 Nm (3.0 - 3.2 kgf.m, 21.70 - 23.14 lb-ft)
Install and uniformly tighten the bearing cap bolts, in several passes, in the sequence shown
NOTE:
^ Always use new main bearing cap bolts.
^ If any of the bearing cap bolts are broken or deformed, replace it.