Oil Seal (Manual Valve Lever)

OIL SEAL (MANUAL VALVE LEVER) REPLACEMENT
1. Remove the TCU.

CAUTION: Be careful not to damage the terminals.

2. Using a screwdriver, remove the oil seal (A).

CAUTION:
- Tape the screwdriver tip before use.
- Be careful hot to damage the transmission case.
- Be careful not to damage the manual valve lever.





3. Using the special tool (09459-3J000) and a hammer, install the new oil seal to the T/A case.
Specification: 0+0.4/-0.3 mm (From end of transmission case)

CAUTION: Be careful not to damage the oil seal.





4. Install the TCU.