Removal and Replacement

DIFFERENTIAL CARRIER (4WD)

COMPONENT:

REMOVAL
1. Drain the differential gear oil.
2. Remove the rear drive shaft.
3. Remove the propeller shaft.
4. Support the differential assembly (A) with the jack (B).





5. Disconnect the coupling control connector (A).





6. After loosen the differential mounting bolts (A), and remove the differential (B).





7. After loosen the cover bolts (A), and remove the differential cover (B).





INSTALLATION
1. After apply liquid gasket, install the differential cover (B), and install the mounting bolts (A).





2. After install the differential (B), and install the mounting bolts (A).





3. Using the transaxle jack (B), install the differential assembly (A).





4. Connect the coupling control connector (A).





5. Install the propeller shaft.
6. Install the rear drive shaft
7. Fill the gear oil.