A/T - Won't Shift Out Of 'PARK'
Group: AUTOMATIC TRANSAXLENumber: 08-AT-011
Date: OCTOBER, 2008
Model: 2008 SANTA FE
Subject:
SHIFT LEVER DIAGNOSIS PROCEDURE
DESCRIPTION:
If a 2007~08 Santa Fe does not shift out of park, follow the Repair Procedure.
REPAIR PROCEDURE:
1. Put the transmission in neutral with the park brake firmly engaged.
2. Pull up on the shift knob to disengage the snap ring and remove the shift knob.
NOTE:
A force of 50 lb or more may be required
3. Remove the center console cover.
4. Remove the center console by removing the two screws (A) and four bolts (B).
5. Disconnect the interlock switch connector.
6. Start the engine, depress the brake pedal, and observe the shift release solenoid. If the solenoid:
^ Moves slightly but does not release the shift lever, go to Step 7.
^ Does not move, refer to TSB 06-40-008-1.
7. Remove the control cable (C) by removing the snap pin (A) and the clip (B).
8. Remove the shift lever bolts and remove the shift lever assembly.
9. Remove the shift lever bracket assembly.
10. Install a new shift lever bracket, P/N 46730-2B100.
11. Re-install the shift lever assembly.
12. Re-install the remaining parts in the reverse order of disassembly.
PARTS INFORMATION:
WARRANTY INFORMATION: