Power Window Relay: Testing and Inspection
POWER WINDOW RELAYINSPECTION
1. Disconnect the negative (-) battery terminal.
2. Remove the junction box.
3. Check for continuity between the terminals.
4. There should be continuity between the No. 6 in the I/P-F and No. 14 terminal in the I/P-D when power and ground are connected to the No. 10 terminal in the I/P-E and No. 2 terminal in the I/P-J.
5. There should be no continuity between the No. 6 terminal in the I/P-F and No. 14 terminal in the l/P-D when power is disconnected.
