Front Wiper Motor

FRONT WIPER MOTOR

REPLACEMENT
1. Remove the windshield wiper arm and blade after removing a nut (A).

TORQUE : 28 - 32 Nm (2.8 - 3.3 kgf.m, 20 - 23.1 lbf.ft)






2. Remove the weather strip and the cowl top cover (A) after removing 4 retainers.






3. Remove the windshield wiper motor and linkage assembly after removing 2 bolts. Disconnect the wiper motor connector and windshield deicer connector from the wiper motor & linkage assembly.

TORQUE : 7 - 11 Nm (0.7 - 1.1, kgf.m, 5.0 - 7.9 lbf.ft)






4. Installation is the reverse of removal.

INSPECTION
1. Install the wiper arm and blade to the specified position.






2. Set the washer nozzle on the specified spray position.