Operation CHARM: Car repair manuals for everyone.

Monitor Scantool Data





Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Engine "ON".
3. Monitor the "WATER TEMP SENSOR" Parameter on the Scantool.




Fig 1) The current data in abnormal state
Fig 2) DTC B1203
4. Are the DTC B1203 present and is parameter of "WATER TEMP.SENSOR" fixed ?

NOTE:
** Parameter of "WATER TEMP SENSOR" will be fixed at 28.4 °F, if there is any fault in WATER TEMP SENSOR