Operation CHARM: Car repair manuals for everyone.

Monitor Scantool Data





Monitor Scantool Data

1. Connect scantool to Data Link Connector (DLC).
2. Engine "ON".
3. Monitor the "INCAR TEMP.SENSOR" Parameter on the Scantool.




Fig 1) The current data in abnormal state
Fig 2) DTC B1233
4. Are the DTC B1233 present and is parameter of "INCAR TEMP.SENSOR" fixed ?

NOTE: Parameter of "INCAR TEMP.SENSOR" will be fixed at 77 °F, if there is any fault in INCAR SENSOR.