Operation CHARM: Car repair manuals for everyone.

Scantool Diagnostics





Monitor Scantool Data

1. Engine "ON".
2. Connect scantool to Data Link Connector (DLC).
3. Start and drive vehicle in gear and maintain vehicle speed is approx. 50 km/h or more (31 mph or more)
4. Monitor the "WHEEL SPD SENSOR-RR" parameter on the Scantool.

Specification : Compare with another parameters related to wheel speed sensor.
If it is the same as another parameters, it is in normal condition.









Fig 1) Test Condition : Drive vehicle at a speed of 50 km/h or more. (31 mph or more)
Normal Data
Fig 2) Test Condition : Drive vehicle at a speed of 51 km/h or more. (31 mph or more)
Normal Graph
Fig 3) Test Condition : Drive vehicle at a speed of 51 km/h or more. (31 mph or more)
Abnormal Data
Fig 4) Test Condition : Drive vehicle at a speed of 51 km/h or more. (31 mph or more)
Abnormal Graph
5. Is parameter displayed within specifications ?