Scantool Diagnostics

Variant Coding

1. Check for improper installation of EMS/TCU/ESC.
2. Connect scantool to Data Link Connector (DLC).
3. Ignition "ON".
4. Go in variant coding (figure 1).
5. Perform variant code. (Press the REST button-figure 2).
6. Disconnect scantool.
7. Ignition "OFF" and then ignition "ON". go to "Component Inspection"Procedure.




Fig 1) ANTI-LOCK brake system : VARIENT CODING
Fig 2) Verient coding completion.