Component Inspection

Component Inspection

1. Check TPS
(1) IG "OFF" and disconnect TPS connector.
(2) Measure resistance between terminals 4 and 5 of TPS connector. (component side)

Specification : 4 - 6 kohms





(3) Is the measured resistance within specification ?






CAUTION:
Procedure of ETS Initialization
1. Erase the trouble codes on PCM
2. Turn the ignition key off and keep this condition until the main relay is turned off. (It will takes 10 sec.)
3. Turn ignition key on more than 1 second to record the throttle motor position on the EEPROM