Component Inspection

Component Inspection

1. Check auto cruise switch
(1) IG "OFF" and disconnect auto cruise switch connector.
(2) Measure resistance between terminals 6 and 7 of auto cruise switch connector with each switch depressed. (Component side)
(3) Measure resistance between terminals 5 and 6 of auto cruise switch connector with each switch depressed. (Component side)
Specification :









(4) Is the measured resistance within specification ?






NOTE: There is a memory reset function on scantool that can erase optional parts automatically detected and memorized by PCM. After testing PCM on the vehicle, use this function to reuse the PCM on the others