General Information

Component Location





General Description

The cruise control system keeps the vehicle running at a fixed speed until a signal canceling this fixed speed is received. When the main switch "AUTO CRUISE" is turned on with vehicle in the running mode, the battery voltage is applied to the PCM. When a signal from the control switch is input to the PCM while the vehicle is in state, the cruise control actuator is activated to operate the system the PCM controls the ETS motor to make a car go at a steady speed you want. Also, while the system is operating, "AUTO CRUISE" indicator lamp in the meter assembly lights up. In case of the cruise control system failure, the symptoms such as acceleration failure and vehicle speed setting failure will occur.

DTC Description

If the SET switch signal is switching too frequently or stuck for too long, PCM sets P0568.

DTC Detecting Condition





Specification





Schematic Diagram