Operation CHARM: Car repair manuals for everyone.

Component Inspection





Component Inspection

1. Check A/C relay
(1) IG "OFF".
(2) Disconnect A/C relay.
(3) Measure the resistance between terminal 2 and 3 of A/C relay.
(4) Measure the resistance between terminal 1 and 4 of A/C relay.
Specification :









(5) Is the measured resistance within specification ?






NOTE: There is a memory reset function on scantool that can erase optional parts automatically detected and memorized by PCM. After testing PCM on the vehicle, use this function to reuse the PCM on the others