Monitor Scantool Data

Monitor Scantool Data

1. Connect scantool to data link connector (DLC)
2. Engine "ON".
3. Monitor the "TCC SOL. VALVE" parameter on the scantool
4. Select "D RANGE" and Operate "TCC SOLENOID DUTY" more than 40%.
















Fig 1) P,N
Fig 2) "R"
Fig 3) "D 1st" gear
Fig 4) "2nd" gear
Fig 5) "3rd" gear
Fig 6) "4th" gear
Fig 7) "5th" gear
5. Does "TCC SOLENOID DUTY" follow the referance data ?