Monitor Scantool Data
Monitor Scantool Data
1. Connect scantool to data link connector (DLC)
2. Engine "ON".
3. Monitor the "LR SOL. VALVE" parameter on the scan tool.
4. Shift gear at each position.
Fig 1) P,N
Fig 2) "R"
Fig 3) "D 1st" gear
Fig 4) "2nd" gear
Fig 5) "3rd" gear
Fig 6) "4th" gear
Fig 7) "5th" gear
5. Does "LR SOLENOID DUTY" follow the referance data ?