Component Inspection

Component Inspection

Check transponder status
1. IGN "ON" & Engine "OFF" with key intended to register
2. Monitor the "KEY STATUS" Parameter on the Scantool.

Specification : 'VIRGIN' or 'LEARNT'





Fig. 1) The current data in abnormal state
3. Is the "KEY STATUS" Parameter within specifications ?





Check transponder
1. IGN "ON" & Engine "OFF"
2. Neutralize ECM and Register transponder key by scantool.

NOTE: Pin code is required to Neutralize ECM and to Register transponder key

3. Are Neutralizing and Registering completed normally ?