Component Inspection

Component Inspection

Check coil antenna.
1. Ignition "OFF"
2. Disconnect SMARTRA.
3. Measure resistance between terminal "1" and "2" of SMARTRA.

Specification : Approx 8.5 ohms





4. Is the measured resistance within specifications ?





Check SMARTRA
1. IGN "ON" & Engine "OFF"
2. Neutralize "SMARTRA" and Register transponder key by scantool.

NOTE:
** Pin code is required to Neutralize ECM and to Register transponder key

3. Are Neutralizing and Registering completed normally ?