Component Inspection

Component Inspection

Check status
1. IGN "ON" & Engine "OFF"
2. Monitor the "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS' Parameter on the Scantool.

Specification : 'LEARNT'





Fig. 1) The current data in normal state
3. Are "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS' Parameter within specifications ?





Check transponder
1. IGN "ON" & Engine "OFF"
2. Neutralize ECM and Register transponder key by scantool.

NOTE:
** Pin code is required to Neutralize ECM and to Register transponder key

3. Are Neutralizing and Registering completed normally ?