Power Door Lock Relay: Testing and Inspection

Inspection

1. Disconnect the negative (-) battery terminal.
2. Remove the junction box.
3. Check for continuity between the terminals.

Door Lock
1. There should be continuity between the No.5 in the I/P-J and No.18 terminals in the I/P-D when power and ground are connected to the No.2 terminal in the I/P-C and No.9 terminal in the I/P-J.
2. There should be no continuity between the No.5 terminal in the I/P-J and No.18 terminal in the I/P-D when power is disconnected.









Door Unlock
1. There should be continuity between the No.5 terminal in the I/P-J and No.7 terminal in the I/P-K when power and ground are connected to the No.2 terminal in the I/P-C and No.1 terminal in the I/P-K.
2. There should be no continuity between the No.5 terminal in the I/P-J and No.7 terminal in the I/P-D when power is disconnected.