Fuel Filter: Service and Repair

Removal

1. Preparation
(1) Remove the 2nd seat .
(2) Open the carpet for fuel pump (A).




(3) Remove the service cover for fuel pump (A).




(4) Disconnect the fuel pump connector (A).




(5) Start the engine and wait until fuel in fuel line is exhausted.
(6) After engine stops, turn the ignition switch off.
2. Open the carpet for sub fuel sender (A).




3. Open the service cover for sub fuel sender (A).




4. Disconnect the sub fuel sender connector (A) and the vacuum tube quick-connector (B)




5. Unfasten the sub fuel sender plate cover (C) and disconnect the suction tube at the bottom of the fuel pump.
6. Remove the sub fuel sender from the fuel tank.






Installation

1. Install the sub fuel sender in according to the reverse order of "Removal" procedure.