Front Hub

Disassembly

1. Remove the brake disc (B) from the knuckle assembly (A).




2. Remove the hub bearing mounting bolts (B) from the knuckle (A).




3. Remove the hub bearing (C) and the dust cover (B) from the knuckle (A).





CAUTION:
Do not disassemble the hub bearing.

Reassembly

1. Install the dust cover (B) to the knuckle (A) and then tighten the mounting bolt (C).

Tightening torque Nm (kgf-m, lb-ft) :
6.9 - 10.8 (0.7 - 1.1, 5.1 - 8.0)





2. Install the hub bearing to the knuckle (A) and then tighten the mounting bolt (B).

Tightening torque Nm (kgf-m, lb-ft) :
78.5 - 98.1 (8 - 10, 57.9 - 72.3)





3. Install the brake disc (B) to the knuckle assembly (A).

Tightening torque Nm (kgf-m, lb-ft) :
Screw(C): 4.9 - 5.9 (0.5 - 0.6, 3.6 - 4.3)