Rear Hub

Disassembly

1. Remove the brake disc from the rear axle carrier assembly.
2. Remove the hub bearing mounting bolts (B) from the rear axle carrier (A).




3. Remove the hub bearing (C) and the parking brake assembly (B) from the rear axle carrier (A).





CAUTION:
Do not disassemble the hub bearing.

Reassembly

1. Install the parking brake bearing (B) and the hub assembly (C) to the rear axle carrier (A).




2. Install the hub bearing to the rear axle carrier (A) and then tighten the mounting bolt (B).

Tightening torque Nm (kgf-m, lb-ft) :
78.5 - 88.3 (8 - 9, 57.9 - 65.1)





3. Install the brake disc to the rear axle carrier assembly.

Tightening torque Nm (kgf-m, lb-ft) :
Screw: 4.9 - 5.9 (0.5 - 0.6, 3.6 - 4.3)