Input Speed Sensor

Replacement

1. Remove the battery and air cleaner (refer to "Transaxle range switch replacement").
2. Remove the transaxle range switch connector.
3. Remove the control cable to transaxle range switch mounting nut.
4. Remove the input speed sensor(A).
(1) Disconnect the input speed sensor connector.
(2) Remove the bolt(B).




(3) Inspect the input speed sensor bore.
5. Apply a light coat of automatic transaxle fluid to the O-ring seal before installation.
6. Install the input speed sensor.
7. Install the control cable mounting bracket.
8. Connect the input speed sensor connector.
9. Install the holder of the control cable.
10. Adjust the control cable to transaxle range switch and tighten the transaxle manual lever to the control cable mounting nut. (refer to "Automatic transaxle shift control installation")
11. Installation is the reverse of removal.