Rear Wiper Motor

Replacement

1. Detach the wiper cap (A), then remove the rear wiper arm (C) after removing a nut (B).

Tightening torque Nut(B) :
10 - 14 Nm (1.0 - 1.4 kgf.m, 7 - 10 lbf.ft)





2. Remove the rear wiper cap & pad (B) after removing a nut (A).

Tightening torque Nut (A) :
10 - 14 Nm (1.0 - 1.4 kgf.m, 7 - 10 lbf.ft)





3. Open the tailgate glass then remove the tailgate trim.
4. Disconnect the rear wiper motor connector then remove the rear wiper motor (B) after removing 3 bolts.

Tightening torque Nut :
10 - 14 Nm (1.0 - 1.4 kgf.m, 7 - 10 lbf.ft)





5. Installation is the reverse of removal.