Component Inspection

Component Inspection

1. Turn ON 'TPMS exciter'.
2. Select "TIRE SNSR CONFIG (EXCITER)" mode.
3. Execute "SET SENSOR STATUS" of Front Right WE sensor.
4. Monitor the parameter of Front Right WE sensor on the 'TPMS exciter'.
A. Specification : 'SENSOR OPTION' is 'HIGH'.




Fig 1) Sensor status (normal)
Fig 2) Executing "SET SENSOR STATUS"
5. Is parameter within specifications ?
YES
1) Substitute with a known-good TPMS receiver module and check for proper operation.
2) If the problem is corrected, replace TPMS receiver module and then go to "Verification of Vehicle Repair" procedure.
NO
1) Replace Front Right WE sensor if necessary and register sensor ID with 'TPMS exciter'.
2) Go to "Verification of Vehicle Repair" procedure.