Engine Control

Monitor DTC Status

1. Check DTC Status
(1) Connect scantool to Data Link Connector (DLC).
(2) IG "ON".
(3) Select "DTC" button, and then Press "DTC Status" to check DTC's information from the DTCs menu.
(4) Read "DTC Status" parameter.








(5) Is parameter displayed "Present fault" ?
YES
1) Substitute with a known - good Catalyst Converter and check for proper operation.
If the problem is corrected, Go to "Verification of Vehicle Repair" procedure.
NO
1) Go to "Component Inspection" procedure.