Operation CHARM: Car repair manuals for everyone.

Component Inspection





Component Inspection

1. Check FTPS
(1) IG "OFF" and connect scantool to DLC (Data Link Connector).
(2) Monitor "FTPS" parameter on service data.
A. Specification :





(3) Is the "FTPS" parameter on the service data O.K ?
YES
1) Substitute with a known - good PCM and check for proper operation.
If the problem is corrected, replace PCM and go to "Verification of Vehicle Repair" procedure.
NO
1) Substitute with a known - good FTPS and check for proper operation.
If the problem is corrected, replace FTPS and go to "Verification of Vehicle Repair" procedure.