Operation CHARM: Car repair manuals for everyone.

General Information





Component Location





General Description

The input (turbine) speed sensor outputs pulse-signals according to the revolutions of the input shaft of the transmission. The TCM determines the input shaft speed by counting the frequency of the pulses. This value is mainly used to control the optimum fluid pressure during shifting.

DTC Description

The TCM sets this code if an output pulse-signal is not detected, from the input speed sensor, when the Output pulse signal is detected over the 24 pulse. The Fail-Safe function will be set by the TCM if this code is detected.

DTC Detecting Condition





Diagnostic Circuit